PRODUCTS
    
|
For stock availability or spacial
aplications please contact sales@loweindustrial.com
|
Cermic Fiber Blanket is produced
from blown alumina-silica fiber, mechanically needled for
added tensile strength and surface integrity.
1. Temperature range (°F): up to 3200 melting point
2. Thickness ½" to 2"
3. Density, pcf: 3 to 8
4. Properties:
· Excellent resistance to chemical attack
· Unaffected by oil and water.
· Thermal and physical properties restored after drying
· High tensile strength
· Light weight insulation, low heat storage, low thermal
conductivity, thermal shock resistance
· Contains no binders.
·No furnace contamination or loss
of strength after firing.
· Flexible and resilient. Conforms
to any shape. Ideal for wrapping
5. Typical Applications:
· Furnace kiln, reformer and boiler lining
· Furnace door lining and seals
· Furnace Repair
· Asbestos replacement
· Expansion joint packing
· Fire protection
· High-temperature gasketing
· Pipe insulation
· Back up insulation
Top
|
|
Ceramic
Fiber boards are a vacuum-formed insulation which are
available in various grades to meet a specific density
and temperature requirements. These boards combine the
lightweight, low thermal conductivity and thermal shock
advantage of ceramic fiber with the high-tensile and
compressive strengths of a rigid board. The rigid
properties allow the board to be resistant to particulate
and hot gas erosion along with most chemical attacks and
abrasions
1 Temperature range (°F): up to 3200 melting point
2 Thickness 1/8" to 3"
3 Properties:
· Low thermal conductivity and heat storage
· Close thickness tolerances
· Excellent surface finish and uniformity
· Easily fabricated and die-cut
· Good resistance to chemical attack
· Different strength ranges in lightweight fiber form
4 Typical Applications:
· High temperature gaskets and seals
· Back up insulation to dense refractories, firebrick
· Expansion joint material
· Appliance and heat processing equipment insulation
· Combustion chamber construction
· General molten metal contact
· Trough linings for molten aluminum
Top
|
|
|
| |
These
bulk products are produced by varying composition, fiber
length, compressed density, fiber content, fiber diameter
and lubricity to serve a wide range of customer needs.
1. Temperature range (°F): up to 3000 melting point
2. Thickness 1/32" to ¼"
3. Density, pcf: 3 to 8
4. Properties:
· Chemical stability and resistance to chemical attack
· Excellent resistance to chemical attack
· Unaffected by oil and water.
· Thermal and physical properties restored after drying
5. Applications:
· High temperature loose fill
· Packing material
· Furnace walls and base seals
· Low mass kiln car top construction
· Packing around hard refractory furnace components such
as burner block
Top
|
|
|
| |
Ceramic
Fiber Modules is a lining system designed for high
temperature furnaces that require corrosion barriers on
the shell. Such modules are held to the steel casing by
stainless steel studs that are welded to the shell before
a protective coating is applied.
1. Temperature range (°F): up to 3200 melting point
2. Thickness 3" to 12" in 1" increments
3. Dimensions: 12" x 12", 16" x 16"
for more dimensions please contact us
4. Density, pcf: 3 to 15
5. Properties:
· Excellent resistance to chemical attack
· Unaffected by oil and water.
· Thermal and physical properties restored after drying
· High tensile strength
· Light weight insulation, low heat storage, low thermal
conductivity, thermal shock resistance
· Installs quickly and reliably over coated shells with
or without vapor barrier
· Better resistance to mechanical abuse than
conventional blanket systems
6. Typical Applications:
· All furnace linings requiring protective barrier
against shell
· Process heaters
· Heat treating furnace
· Forge Furnace
· Incinerators
Top
|
|
|
| |
Ceramic
Fiber paper is produced from a high purity ceramic fibers
and organic binders. The material is noted for its
excellent tensile strength, flexible properties,
outstanding handling characteristics and high insulating
value at high temperatures. They can be easily cut or
shaped to your individual requirements.
1 Temperature range (°F): up to 3200 melting point
2 Thickness 1/32" to ¼"
3 Density, pcf: 3 to 8
4 Properties:
· Excellent resistance to chemical attack
· Unaffected by oil and water.
· Thermal and physical properties restored after drying
· High tensile strength
· Light weight insulation, low heat storage, low thermal
conductivity, thermal shock resistance
· Flexible and resilient. Conforms to any shape. Ideal
for wrapping
· Easily die cut
5 Typical Applications:
· Gasketing between aluminum and zinc trough sections
· Refractory back-up
· Mold linings
· Gasket for any high temperature aplication
· Fire protection
· Ladle refractory backup
Top
|
|
|
| |
Moldable
Ceramic Fiber is a mixture of ceramic fiber, silica
binders, and fillers which produces and insulating
product with a sticky consistency that will harden after
dry out.
1. Temperature range (°F): up to 3200 melting point
2. Standard sizes:
· 1 gallon can
· 5 gallon can
· 11 ¾ oz tube (32 tubes/case)
3. Dry Density, pcf: 47
4. Properties:
· Moldable
· Drying is possible at room temperature
5. Typical Applications:
· Metal stud protection
· Patching mix for ceramic fiber and refractory products
· Trough linings for aluminum and other non-ferrous
metals
· Patching around burner blocks
Top
Top
|
|
|
| |
Calcium
Silicate refractory boards are specifically designed for
molten metal applications. Components are machined for
the movement, distribution, flow control and casting of
non-ferrous metals and their alloys. The exceptional
strength and durability of these boards insures that
components are highly resistant to breakage during
casting and subsequent cleaning. They have excellent
resistance to metal flow.
1. Temperature range (°F): 1562
2. Dimensions:
· Lengths: 39", 59", 118"
· Width: 48"
· Thickness ½" to 4"
- Available in sheets or as precision machined components
3. Properties:
· Non-combustible
· Excellent machining characteristics
· Non-wetting performance
· Will resist chemical attack by alloying elements,
lubricants, boron nitride and graphite coating
· Asbestos free
· Low thermal conductivity
· Resistant to thermal shock
4. Typical Applications:
· Floats
· Dip tubes and spouts
· Stoppers
· Nozzles
· Distribution boxes
· Flow gates
· Skimmers
· Hot pipe supports
· Gaskets
· Rings
· Roller supports
· Heating tape supports
Technical
Characteristics
·
Excellent insulation power
· Excellent mechanical resistanace
· Excellent resistance to thermal shock
· Excellent acoustic and dielectric isolation
Top
|
|
|
| |
Studs
and washers available in 30SS, 310SS, 330SS, and Inconel
601 for use up to 2050 F. Ceramic cone anchor available
as closure to increase use temperature up to 2300 F.
Anchors are
designed to be used with blanket wallpaper furnace
lining. A wide range of length is available:1 ½" to
16". Stud lengths 3 ½" and no longer have five
notches which allow adjustments in compressing the
blanket when installing the washer.
Washers: are
designed for easy handling . When properly installed, the
washer will remain in place on roofs and in severe
vibration applications.
Top
|
|
|
| |
|
|
|
